Procedure: Removing the camera bottom
Thanks to: unknown contributor
This data is provided for informational purposes only. You must assess your ability to perform the
operations described. Neither the individual contributor nor Rocky Mountain Memories assumes any
responsibility for damage you may inflict on your camera by following these directions.
The bottom of the Nimslo camera is quite easy to remove. First remove the batteries, then remove the three bottom
screws. The bottom of the camera comes off quite easily. I have had to do this once, to help unjam the film-advance
mechanism. (most of the "mechanics" of the film winder are down here.) I have not taken apart the mechanics.
Return to RMM Stereo Camera Repair index
Return to RMM 3D Encyclopedia index
| [Home] |